 |
| Quantity: | |
|---|---|
0.6/1kV NA2XY Aluminum Conductor XLPE Insulation Power Cable
Introduction of NA2XY Copper Conductor XLPE Insulation Power Cable
XLPE insulated power cables for rated voltages up to 0.6/1 kV are fit for AC 50Hz distribution lines for the same rated voltages. The mechanical and electrical properties of these cables are accordant with GB/T12706—2008 ( Power
cables extruded insulation and their accessories of rated voltagesl kV(Umz1.2kV)up to ) and IEC-60502—1 :2004 ( Extruded insulation power cables and appendites for rated voltages 1kV up to 30kV)
Instruction of Application
1. Rated Voltage: 0.6/1kV
2. Max.permissible operating temperature of conductor is 90℃.
3. Conductor short-circuit temperature shall not exceed 250℃ Max. sustaining period shall not exceed 5 seconds.
4. Bending Radius
Bending radius of single core cable:20(D+d)±5%
Bending radius of multi core cable:15(D+d)±5%
D-Actual outer diameter of cable sample(mm);
d-Actual diameter of the conductor(mm).
5. No restriction of level difference along the route for installation.
6. Installation temperature shall be heated when ambient temperature is below 0℃
Production Range of XLPE Insulated Power Cable
Type | Description | Scope of Application |
YJV YJLV Z(K)-YJV Z(K)-YJLV | Cu or AI conductor XLPE insulated PVC sheathed power cable | Installed indoors or outdoors. In case unable to bear external mechanical forces but tractive force during laying, single core cable in magnetic duct is not permissible. |
YJV22 YJLV22 Z(K)-YJV22 Z(K)-YJLV22 | Cu or AI Conductor XLPE Insulated PVC Sheathed Steel Tape Armoured Power Cable | For laying in ground able to bear external mechanical forces, but unable to bear large pulling force. |
YJV32 YJLV32 Z(K)-YJV32 Z(K)-YJLV32 | Cu or AI Conductor XLPE Insulated PVC Sheathed Fine Steel Wire Armoured Power Cable | For laying in water or able to bear external mechanical forces and equal pulling force. |
Structure of NA2XY Aluminum Conductor XLPE Insulation Power Cable
The main technique performance of NA2XY Aluminum Conductor XLPE Insulation Power Cable
Maximum DC resistance of cable conductor at 20℃
Rated cross area（mm2） | 0.5 | 0.75 | 1.0 | 1.5 | 2.5 | 4 | 6 | 10 | |
Cu（Ω/km） | Non tinned | 36.0 | 24.5 | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | 1.83 |
Tinned | 36.7 | 24.8 | 18.2 | 12.2 | 7.56 | 4.70 | 3.11 | 1.84 | |
Al （Ω/km） | / | / | / | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | |
Rated cross area（mm2） | 16 | 25 | 35 | 50 | 70 | 95 | 120 | 150 | |
Cu （Ω/km） | Non tinned | 1.15 | 0.727 | 0.524 | 0.387 | 0.268 | 0.193 | 0.153 | 0.124 |
Tinned | 1.16 | 0.734 | 0.529 | 0.391 | 0.270 | 0.195 | 0.154 | 0.126 | |
Al （Ω/km） | 1.91 | 1.20 | 0.868 | 0.641 | 0.443 | 0.320 | 0.253 | 0.206 | |
Rated cross area（mm2） | 185 | 240 | 300 | 400 | 500 | 630 | 800 | 1000 | |
Cu （Ω/km） | Non tinned | 0.0991 | 0.0754 | 0.0601 | 0.0470 | 0.0366 | 0.0283 | 0.0221 | 0.0176 |
Tinned | 0.100 | 0.0762 | 0.0607 | 0.0475 | 0.0369 | 0.0286 | 0.0224 | 0.0177 | |
Al （ Ω/km） | 0.164 | 0.125 | 0.100 | 0.0778 | 0.0605 | 0.0469 | 0.0367 | 0.0291 | |
Approximate size & weight of NA2XY Aluminum Conductor XLPE Insulation Power Cable
Single-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 1.5 | 1.38 | 0.7 | 1.4 | 6 | 38 |
| 2.5 | 1.78 | 0.7 | 1.4 | 6 | 44 |
| 4 | 2.25 | 0.7 | 1.4 | 7 | 52 |
| 6 | 2.76 | 0.7 | 1.4 | 7 | 62 |
| 10 | 4.05 | 0.7 | 1.4 | 8 | 84 |
| 16 | 5.01 | 0.7 | 1.4 | 9 | 109 |
| 25 | 6.0 | 0.9 | 1.4 | 11 | 149 |
| 35 | 7.0 | 0.9 | 1.4 | 12 | 184 |
| 50 | 8.1 | 1.0 | 1.4 | 13 | 232 |
| 70 | 9.9 | 1.1 | 1.4 | 15 | 310 |
| 95 | 11.5 | 1.1 | 1.5 | 17 | 404 |
| 120 | 12.9 | 1.2 | 1.5 | 18 | 490 |
| 150 | 14.3 | 1.4 | 1.6 | 20 | 603 |
| 185 | 16.0 | 1.6 | 1.7 | 23 | 748 |
| 240 | 18.4 | 1.7 | 1.8 | 26 | 954 |
| 300 | 20.6 | 1.8 | 1.8 | 28 | 1157 |
| 400 | 23.3 | 2.0 | 2.0 | 32 | 1478 |
| 500 | 26.7 | 2.2 | 2.1 | 36 | 1874 |
| 630 | 30.4 | 2.4 | 2.2 | 40 | 2382 |
Two-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 2*4 | 2.25 | 0.7 | 1.8 | 11 | 123 |
| 2*6 | 2.76 | 0.7 | 1.8 | 12 | 150 |
| 2*10 | 4.05 | 0.7 | 1.8 | 15 | 214 |
| 2*16 | 5.01 | 0.7 | 1.8 | 17 | 285 |
| 2*25 | 6.0 | 0.9 | 1.8 | 21 | 393 |
| 2*35 | 7.0 | 0.9 | 1.8 | 23 | 486 |
| 2*50 | 5.41 | 1.0 | 1.8 | 21 | 499 |
| 2*70 | 6.58 | 1.1 | 1.8 | 23 | 657 |
| 2*95 | 7.77 | 1.1 | 2.0 | 27 | 864 |
| 2*120 | 8.75 | 1.2 | 2.1 | 29 | 1058 |
| 2*150 | 9.71 | 1.4 | 2.2 | 32 | 1292 |
| 2*185 | 10.97 | 1.6 | 2.3 | 36 | 1583 |
Three-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*1.5 | 1.38 | 0.7 | 1.8 | 10 | 99 |
| 3*2.5 | 1.78 | 0.7 | 1.8 | 11 | 120 |
| 3*4 | 2.25 | 0.7 | 1.8 | 12 | 145 |
| 3*6 | 2.76 | 0.7 | 1.8 | 13 | 179 |
| 3*10 | 4.05 | 0.7 | 1.8 | 16 | 253 |
| 3*16 | 5.01 | 0.7 | 1.8 | 18 | 342 |
| 3*25 | 6.0 | 0.9 | 1.8 | 22 | 482 |
| 3*35 | 7.0 | 0.9 | 1.8 | 24 | 613 |
| 3*50 | 6.81 | 1.0 | 1.8 | 24 | 695 |
| 3*70 | 8.23 | 1.1 | 1.8 | 28 | 935 |
| 3*95 | 9.71 | 1.1 | 2.0 | 31 | 1220 |
| 3*120 | 10.95 | 1.2 | 2.1 | 34 | 1497 |
| 3*150 | 12.16 | 1.4 | 2.3 | 38 | 1861 |
| 3*185 | 13.61 | 1.6 | 2.4 | 42 | 2281 |
| 3*240 | 15.65 | 1.7 | 2.6 | 47 | 2920 |
| 3*300 | 17.53 | 1.8 | 2.8 | 52 | 3642 |
3+1 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*4+1*2.5 | 2.25 | 0.7 | 1.8 | 13 | 166 |
| 3*6+1*4 | 2.76 | 0.7 | 1.8 | 14 | 205 |
| 3*10+1*6 | 4.05 | 0.7 | 1.8 | 17 | 285 |
| 3*16+1*10 | 5.01 | 0.7 | 1.8 | 19 | 396 |
| 3*25+1*16 | 6.0 | 0.9 | 1.8 | 23 | 556 |
| 3*35+1*16 | 7.0 | 0.9 | 1.8 | 25 | 668 |
| 3*50+1*25 | 6.81 | 1.0 | 1.8 | 27 | 809 |
| 3*70+1*35 | 8.23 | 1.1 | 1.9 | 30 | 1090 |
| 3*95+1*50 | 9.71 | 1.1 | 2.1 | 35 | 1433 |
| 3*120+1*70 | 10.95 | 1.2 | 2.2 | 38 | 1794 |
| 3*150+1*70 | 12.16 | 1.4 | 2.3 | 42 | 2136 |
| 3*185+1*95 | 13.61 | 1.6 | 2.5 | 47 | 2674 |
| 3*240+1*120 | 15.65 | 1.7 | 2.7 | 52 | 3395 |
| 3*300+1*150 | 17.53 | 1.8 | 2.9 | 57 | 4180 |
Four-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 4*1.5 | 1.38 | 0.7 | 1.8 | 11 | 117 |
| 4*2.5 | 1.78 | 0.7 | 1.8 | 12 | 142 |
| 4*4 | 2.25 | 0.7 | 1.8 | 13 | 175 |
| 4*6 | 2.76 | 0.7 | 1.8 | 14 | 214 |
| 4*10 | 4.05 | 0.7 | 1.8 | 17 | 307 |
| 4*16 | 5.01 | 0.7 | 1.8 | 20 | 416 |
| 4*25 | 6.0 | 0.9 | 1.8 | 25 | 585 |
| 4*35 | 7.0 | 0.9 | 1.8 | 27 | 747 |
| 4*50 | 7.77 | 1.0 | 1.9 | 28 | 886 |
| 4*70 | 9.36 | 1.1 | 2.0 | 32 | 1193 |
| 4*95 | 11.03 | 1.1 | 2.1 | 36 | 1567 |
| 4*120 | 12.55 | 1.2 | 2.3 | 39 | 1941 |
| 4*150 | 15.94 | 1.4 | 2.4 | 44 | 2380 |
| 4*185 | 15.59 | 1.6 | 2.6 | 48 | 2955 |
| 4*240 | 17.6 | 1.7 | 2.8 | 54 | 3778 |
| 4*300 | 19.96 | 1.8 | 3.0 | 60 | 4646 |
3+2 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*4+2*1.5 | 2.25 | 0.7 | 1.8 | 13 | 187 |
| 3*6+2*4 | 2.76 | 0.7 | 1.8 | 15 | 234 |
| 3*10+2*6 | 4.05 | 0.7 | 1.8 | 17 | 320 |
| 3*16+2*10 | 5.01 | 0.7 | 1.8 | 21 | 446 |
| 3*25+2*16 | 6.0 | 0.9 | 1.8 | 24 | 633 |
| 3*35+2*16 | 7.0 | 0.9 | 1.8 | 26 | 742 |
| 3*50+2*25 | 8.1 | 1.0 | 1.9 | 30 | 1029 |
| 3*70+2*35 | 9.9 | 1.1 | 2.0 | 35 | 1392 |
| 3*95+2*50 | 11.5 | 1.1 | 2.1 | 39 | 1814 |
| 3*120+2*70 | 12.9 | 1.2 | 2.3 | 44 | 2176 |
| 3*150+2*70 | 14.3 | 1.4 | 2.4 | 48 | 2552 |
| 3*185+2*95 | 16.0 | 1.6 | 2.6 | 53 | 3204 |
| 3*240+2*120 | 18.4 | 1.7 | 2.8 | 60 | 4086 |
| 3*300+2*150 | 20.6 | 1.8 | 3.0 | 66 | 5045 |
4+1 core of NA2XY AluminumConductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 4*4+1*2.5 | 2.25 | 0.7 | 1.8 | 14 | 197 |
| 4*6+1*4 | 2.76 | 0.7 | 1.8 | 15 | 271 |
| 4*10+1*6 | 4.05 | 0.7 | 1.8 | 17 | 361 |
| 4*16+1*10 | 5.01 | 0.7 | 1.8 | 21 | 475 |
| 4*25+1*16 | 6.0 | 0.9 | 1.8 | 25 | 670 |
| 4*35+1*16 | 7.0 | 0.9 | 1.8 | 27 | 823 |
| 4*50+1*25 | 8.1 | 1.0 | 1.9 | 32 | 1127 |
| 4*70+1*35 | 9.9 | 1.1 | 2.1 | 37 | 1539 |
| 4*95+1*50 | 11.5 | 1.1 | 2.2 | 41 | 1986 |
| 4*120+1*70 | 12.9 | 1.2 | 2.4 | 46 | 2522 |
| 4*150+1*70 | 14.3 | 1.4 | 2.5 | 50 | 2865 |
| 4*185+1*95 | 16.0 | 1.6 | 2.7 | 56 | 3599 |
| 4*240+1*120 | 18.4 | 1.7 | 2.9 | 63 | 4598 |
| 4*300+1*150 | 20.6 | 1.8 | 3.1 | 70 | 5659 |
5 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 5*4 | 2.25 | 0.7 | 1.8 | 14 | 206 |
| 5*6 | 2.76 | 0.7 | 1.8 | 15 | 256 |
| 5*10 | 4.05 | 0.7 | 1.8 | 19 | 370 |
| 5*16 | 5.01 | 0.7 | 1.8 | 22 | 499 |
| 5*25 | 6.0 | 0.9 | 1.8 | 25 | 710 |
| 5*35 | 7.0 | 0.9 | 1.8 | 28 | 905 |
| 5*50 | 8.1 | 1.0 | 2.0 | 33 | 1234 |
| 5*70 | 9.9 | 1.1 | 2.1 | 37 | 1669 |
| 5*95 | 11.5 | 1.1 | 2.3 | 43 | 2199 |
| 5*120 | 12.9 | 1.2 | 2.4 | 48 | 2575 |
| 5*150 | 14.3 | 1.4 | 2.6 | 53 | 3213 |
| 5*185 | 16.0 | 1.6 | 2.8 | 59 | 3962 |
| 5*240 | 18.4 | 1.7 | 3.0 | 67 | 5198 |
| 5*300 | 20.6 | 1.8 | 3.2 | 74 | 6314 |
The power cable current capacity of 0.6/1kV NA2XY Aluminum Conductor XLPE Insulation Power Cable
Apply the model number: YJV(N2XY) YJLV(NA2XY)
Limit the term：Environment temperature：400C；： Soil temperature：250C； Soil thermal receptivity: 2000C·cm/W
Conductor Area mm2 | The long-term admission current-carrying capacity in air（A） | The long-term admission current-carrying capacity in soil（A） | ||||||
Copper core cable | Aluminum core cable | Copper core cable | Aluminum core cable | |||||
1-core | 3 or 4 core | 1-core | 3 or 4 core | 1-core | 3 or 4 core | 1-core | 3 or 4 core | |
2.5 | 34 | 32 | 27 | 25 | 36 | 32 | 27 | 25 |
4 | 44 | 41 | 35 | 32 | 47 | 41 | 35 | 32 |
6 | 56 | 52 | 45 | 42 | 59 | 52 | 46 | 42 |
10 | 77 | 70 | 60 | 53 | 78 | 69 | 59 | 53 |
16 | 100 | 91 | 78 | 70 | 102 | 90 | 77 | 71 |
25 | 132 | 118 | 102 | 91 | 130 | 117 | 104 | 91 |
35 | 164 | 150 | 127 | 114 | 169 | 143 | 117 | 113 |
50 | 196 | 182 | 152 | 146 | 187 | 169 | 139 | 134 |
70 | 251 | 228 | 195 | 178 | 226 | 208 | 174 | 165 |
95 | 305 | 273 | 236 | 214 | 269 | 247 | 208 | 195 |
120 | 351 | 314 | 272 | 246 | 300 | 282 | 239 | 221 |
150 | 401 | 360 | 311 | 278 | 339 | 321 | 269 | 247 |
185 | 461 | 410 | 359 | 319 | 382 | 356 | 300 | 278 |
240 | 546 | 483 | 424 | 378 | 435 | 408 | 348 | 321 |
300 | 611 | 552 | 474 | 419 | 495 | 469 | 391 | 365 |
400 | 716 | / | 546 | / | 574 | / | 456 | / |
0.6/1kV NA2XY Aluminum Conductor XLPE Insulation Power Cable
Introduction of NA2XY Copper Conductor XLPE Insulation Power Cable
XLPE insulated power cables for rated voltages up to 0.6/1 kV are fit for AC 50Hz distribution lines for the same rated voltages. The mechanical and electrical properties of these cables are accordant with GB/T12706—2008 ( Power
cables extruded insulation and their accessories of rated voltagesl kV(Umz1.2kV)up to ) and IEC-60502—1 :2004 ( Extruded insulation power cables and appendites for rated voltages 1kV up to 30kV)
Instruction of Application
1. Rated Voltage: 0.6/1kV
2. Max.permissible operating temperature of conductor is 90℃.
3. Conductor short-circuit temperature shall not exceed 250℃ Max. sustaining period shall not exceed 5 seconds.
4. Bending Radius
Bending radius of single core cable:20(D+d)±5%
Bending radius of multi core cable:15(D+d)±5%
D-Actual outer diameter of cable sample(mm);
d-Actual diameter of the conductor(mm).
5. No restriction of level difference along the route for installation.
6. Installation temperature shall be heated when ambient temperature is below 0℃
Production Range of XLPE Insulated Power Cable
Type | Description | Scope of Application |
YJV YJLV Z(K)-YJV Z(K)-YJLV | Cu or AI conductor XLPE insulated PVC sheathed power cable | Installed indoors or outdoors. In case unable to bear external mechanical forces but tractive force during laying, single core cable in magnetic duct is not permissible. |
YJV22 YJLV22 Z(K)-YJV22 Z(K)-YJLV22 | Cu or AI Conductor XLPE Insulated PVC Sheathed Steel Tape Armoured Power Cable | For laying in ground able to bear external mechanical forces, but unable to bear large pulling force. |
YJV32 YJLV32 Z(K)-YJV32 Z(K)-YJLV32 | Cu or AI Conductor XLPE Insulated PVC Sheathed Fine Steel Wire Armoured Power Cable | For laying in water or able to bear external mechanical forces and equal pulling force. |
Structure of NA2XY Aluminum Conductor XLPE Insulation Power Cable
The main technique performance of NA2XY Aluminum Conductor XLPE Insulation Power Cable
Maximum DC resistance of cable conductor at 20℃
Rated cross area（mm2） | 0.5 | 0.75 | 1.0 | 1.5 | 2.5 | 4 | 6 | 10 | |
Cu（Ω/km） | Non tinned | 36.0 | 24.5 | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | 1.83 |
Tinned | 36.7 | 24.8 | 18.2 | 12.2 | 7.56 | 4.70 | 3.11 | 1.84 | |
Al （Ω/km） | / | / | / | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | |
Rated cross area（mm2） | 16 | 25 | 35 | 50 | 70 | 95 | 120 | 150 | |
Cu （Ω/km） | Non tinned | 1.15 | 0.727 | 0.524 | 0.387 | 0.268 | 0.193 | 0.153 | 0.124 |
Tinned | 1.16 | 0.734 | 0.529 | 0.391 | 0.270 | 0.195 | 0.154 | 0.126 | |
Al （Ω/km） | 1.91 | 1.20 | 0.868 | 0.641 | 0.443 | 0.320 | 0.253 | 0.206 | |
Rated cross area（mm2） | 185 | 240 | 300 | 400 | 500 | 630 | 800 | 1000 | |
Cu （Ω/km） | Non tinned | 0.0991 | 0.0754 | 0.0601 | 0.0470 | 0.0366 | 0.0283 | 0.0221 | 0.0176 |
Tinned | 0.100 | 0.0762 | 0.0607 | 0.0475 | 0.0369 | 0.0286 | 0.0224 | 0.0177 | |
Al （ Ω/km） | 0.164 | 0.125 | 0.100 | 0.0778 | 0.0605 | 0.0469 | 0.0367 | 0.0291 | |
Approximate size & weight of NA2XY Aluminum Conductor XLPE Insulation Power Cable
Single-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 1.5 | 1.38 | 0.7 | 1.4 | 6 | 38 |
| 2.5 | 1.78 | 0.7 | 1.4 | 6 | 44 |
| 4 | 2.25 | 0.7 | 1.4 | 7 | 52 |
| 6 | 2.76 | 0.7 | 1.4 | 7 | 62 |
| 10 | 4.05 | 0.7 | 1.4 | 8 | 84 |
| 16 | 5.01 | 0.7 | 1.4 | 9 | 109 |
| 25 | 6.0 | 0.9 | 1.4 | 11 | 149 |
| 35 | 7.0 | 0.9 | 1.4 | 12 | 184 |
| 50 | 8.1 | 1.0 | 1.4 | 13 | 232 |
| 70 | 9.9 | 1.1 | 1.4 | 15 | 310 |
| 95 | 11.5 | 1.1 | 1.5 | 17 | 404 |
| 120 | 12.9 | 1.2 | 1.5 | 18 | 490 |
| 150 | 14.3 | 1.4 | 1.6 | 20 | 603 |
| 185 | 16.0 | 1.6 | 1.7 | 23 | 748 |
| 240 | 18.4 | 1.7 | 1.8 | 26 | 954 |
| 300 | 20.6 | 1.8 | 1.8 | 28 | 1157 |
| 400 | 23.3 | 2.0 | 2.0 | 32 | 1478 |
| 500 | 26.7 | 2.2 | 2.1 | 36 | 1874 |
| 630 | 30.4 | 2.4 | 2.2 | 40 | 2382 |
Two-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 2*4 | 2.25 | 0.7 | 1.8 | 11 | 123 |
| 2*6 | 2.76 | 0.7 | 1.8 | 12 | 150 |
| 2*10 | 4.05 | 0.7 | 1.8 | 15 | 214 |
| 2*16 | 5.01 | 0.7 | 1.8 | 17 | 285 |
| 2*25 | 6.0 | 0.9 | 1.8 | 21 | 393 |
| 2*35 | 7.0 | 0.9 | 1.8 | 23 | 486 |
| 2*50 | 5.41 | 1.0 | 1.8 | 21 | 499 |
| 2*70 | 6.58 | 1.1 | 1.8 | 23 | 657 |
| 2*95 | 7.77 | 1.1 | 2.0 | 27 | 864 |
| 2*120 | 8.75 | 1.2 | 2.1 | 29 | 1058 |
| 2*150 | 9.71 | 1.4 | 2.2 | 32 | 1292 |
| 2*185 | 10.97 | 1.6 | 2.3 | 36 | 1583 |
Three-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*1.5 | 1.38 | 0.7 | 1.8 | 10 | 99 |
| 3*2.5 | 1.78 | 0.7 | 1.8 | 11 | 120 |
| 3*4 | 2.25 | 0.7 | 1.8 | 12 | 145 |
| 3*6 | 2.76 | 0.7 | 1.8 | 13 | 179 |
| 3*10 | 4.05 | 0.7 | 1.8 | 16 | 253 |
| 3*16 | 5.01 | 0.7 | 1.8 | 18 | 342 |
| 3*25 | 6.0 | 0.9 | 1.8 | 22 | 482 |
| 3*35 | 7.0 | 0.9 | 1.8 | 24 | 613 |
| 3*50 | 6.81 | 1.0 | 1.8 | 24 | 695 |
| 3*70 | 8.23 | 1.1 | 1.8 | 28 | 935 |
| 3*95 | 9.71 | 1.1 | 2.0 | 31 | 1220 |
| 3*120 | 10.95 | 1.2 | 2.1 | 34 | 1497 |
| 3*150 | 12.16 | 1.4 | 2.3 | 38 | 1861 |
| 3*185 | 13.61 | 1.6 | 2.4 | 42 | 2281 |
| 3*240 | 15.65 | 1.7 | 2.6 | 47 | 2920 |
| 3*300 | 17.53 | 1.8 | 2.8 | 52 | 3642 |
3+1 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*4+1*2.5 | 2.25 | 0.7 | 1.8 | 13 | 166 |
| 3*6+1*4 | 2.76 | 0.7 | 1.8 | 14 | 205 |
| 3*10+1*6 | 4.05 | 0.7 | 1.8 | 17 | 285 |
| 3*16+1*10 | 5.01 | 0.7 | 1.8 | 19 | 396 |
| 3*25+1*16 | 6.0 | 0.9 | 1.8 | 23 | 556 |
| 3*35+1*16 | 7.0 | 0.9 | 1.8 | 25 | 668 |
| 3*50+1*25 | 6.81 | 1.0 | 1.8 | 27 | 809 |
| 3*70+1*35 | 8.23 | 1.1 | 1.9 | 30 | 1090 |
| 3*95+1*50 | 9.71 | 1.1 | 2.1 | 35 | 1433 |
| 3*120+1*70 | 10.95 | 1.2 | 2.2 | 38 | 1794 |
| 3*150+1*70 | 12.16 | 1.4 | 2.3 | 42 | 2136 |
| 3*185+1*95 | 13.61 | 1.6 | 2.5 | 47 | 2674 |
| 3*240+1*120 | 15.65 | 1.7 | 2.7 | 52 | 3395 |
| 3*300+1*150 | 17.53 | 1.8 | 2.9 | 57 | 4180 |
Four-core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 4*1.5 | 1.38 | 0.7 | 1.8 | 11 | 117 |
| 4*2.5 | 1.78 | 0.7 | 1.8 | 12 | 142 |
| 4*4 | 2.25 | 0.7 | 1.8 | 13 | 175 |
| 4*6 | 2.76 | 0.7 | 1.8 | 14 | 214 |
| 4*10 | 4.05 | 0.7 | 1.8 | 17 | 307 |
| 4*16 | 5.01 | 0.7 | 1.8 | 20 | 416 |
| 4*25 | 6.0 | 0.9 | 1.8 | 25 | 585 |
| 4*35 | 7.0 | 0.9 | 1.8 | 27 | 747 |
| 4*50 | 7.77 | 1.0 | 1.9 | 28 | 886 |
| 4*70 | 9.36 | 1.1 | 2.0 | 32 | 1193 |
| 4*95 | 11.03 | 1.1 | 2.1 | 36 | 1567 |
| 4*120 | 12.55 | 1.2 | 2.3 | 39 | 1941 |
| 4*150 | 15.94 | 1.4 | 2.4 | 44 | 2380 |
| 4*185 | 15.59 | 1.6 | 2.6 | 48 | 2955 |
| 4*240 | 17.6 | 1.7 | 2.8 | 54 | 3778 |
| 4*300 | 19.96 | 1.8 | 3.0 | 60 | 4646 |
3+2 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 3*4+2*1.5 | 2.25 | 0.7 | 1.8 | 13 | 187 |
| 3*6+2*4 | 2.76 | 0.7 | 1.8 | 15 | 234 |
| 3*10+2*6 | 4.05 | 0.7 | 1.8 | 17 | 320 |
| 3*16+2*10 | 5.01 | 0.7 | 1.8 | 21 | 446 |
| 3*25+2*16 | 6.0 | 0.9 | 1.8 | 24 | 633 |
| 3*35+2*16 | 7.0 | 0.9 | 1.8 | 26 | 742 |
| 3*50+2*25 | 8.1 | 1.0 | 1.9 | 30 | 1029 |
| 3*70+2*35 | 9.9 | 1.1 | 2.0 | 35 | 1392 |
| 3*95+2*50 | 11.5 | 1.1 | 2.1 | 39 | 1814 |
| 3*120+2*70 | 12.9 | 1.2 | 2.3 | 44 | 2176 |
| 3*150+2*70 | 14.3 | 1.4 | 2.4 | 48 | 2552 |
| 3*185+2*95 | 16.0 | 1.6 | 2.6 | 53 | 3204 |
| 3*240+2*120 | 18.4 | 1.7 | 2.8 | 60 | 4086 |
| 3*300+2*150 | 20.6 | 1.8 | 3.0 | 66 | 5045 |
4+1 core of NA2XY AluminumConductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 4*4+1*2.5 | 2.25 | 0.7 | 1.8 | 14 | 197 |
| 4*6+1*4 | 2.76 | 0.7 | 1.8 | 15 | 271 |
| 4*10+1*6 | 4.05 | 0.7 | 1.8 | 17 | 361 |
| 4*16+1*10 | 5.01 | 0.7 | 1.8 | 21 | 475 |
| 4*25+1*16 | 6.0 | 0.9 | 1.8 | 25 | 670 |
| 4*35+1*16 | 7.0 | 0.9 | 1.8 | 27 | 823 |
| 4*50+1*25 | 8.1 | 1.0 | 1.9 | 32 | 1127 |
| 4*70+1*35 | 9.9 | 1.1 | 2.1 | 37 | 1539 |
| 4*95+1*50 | 11.5 | 1.1 | 2.2 | 41 | 1986 |
| 4*120+1*70 | 12.9 | 1.2 | 2.4 | 46 | 2522 |
| 4*150+1*70 | 14.3 | 1.4 | 2.5 | 50 | 2865 |
| 4*185+1*95 | 16.0 | 1.6 | 2.7 | 56 | 3599 |
| 4*240+1*120 | 18.4 | 1.7 | 2.9 | 63 | 4598 |
| 4*300+1*150 | 20.6 | 1.8 | 3.1 | 70 | 5659 |
5 core of NA2XY Aluminum Conductor XLPE Insulation Power Cable
| Normal cross-sectional area of conductor | Overall diameter of conductor | Normal thickness of insulation | Normal thickness of sheath | Approx. overall diameter | Approx. weight |
| mm² | mm | mm | mm | mm | kg/km |
| 5*4 | 2.25 | 0.7 | 1.8 | 14 | 206 |
| 5*6 | 2.76 | 0.7 | 1.8 | 15 | 256 |
| 5*10 | 4.05 | 0.7 | 1.8 | 19 | 370 |
| 5*16 | 5.01 | 0.7 | 1.8 | 22 | 499 |
| 5*25 | 6.0 | 0.9 | 1.8 | 25 | 710 |
| 5*35 | 7.0 | 0.9 | 1.8 | 28 | 905 |
| 5*50 | 8.1 | 1.0 | 2.0 | 33 | 1234 |
| 5*70 | 9.9 | 1.1 | 2.1 | 37 | 1669 |
| 5*95 | 11.5 | 1.1 | 2.3 | 43 | 2199 |
| 5*120 | 12.9 | 1.2 | 2.4 | 48 | 2575 |
| 5*150 | 14.3 | 1.4 | 2.6 | 53 | 3213 |
| 5*185 | 16.0 | 1.6 | 2.8 | 59 | 3962 |
| 5*240 | 18.4 | 1.7 | 3.0 | 67 | 5198 |
| 5*300 | 20.6 | 1.8 | 3.2 | 74 | 6314 |
The power cable current capacity of 0.6/1kV NA2XY Aluminum Conductor XLPE Insulation Power Cable
Apply the model number: YJV(N2XY) YJLV(NA2XY)
Limit the term：Environment temperature：400C；： Soil temperature：250C； Soil thermal receptivity: 2000C·cm/W
Conductor Area mm2 | The long-term admission current-carrying capacity in air（A） | The long-term admission current-carrying capacity in soil（A） | ||||||
Copper core cable | Aluminum core cable | Copper core cable | Aluminum core cable | |||||
1-core | 3 or 4 core | 1-core | 3 or 4 core | 1-core | 3 or 4 core | 1-core | 3 or 4 core | |
2.5 | 34 | 32 | 27 | 25 | 36 | 32 | 27 | 25 |
4 | 44 | 41 | 35 | 32 | 47 | 41 | 35 | 32 |
6 | 56 | 52 | 45 | 42 | 59 | 52 | 46 | 42 |
10 | 77 | 70 | 60 | 53 | 78 | 69 | 59 | 53 |
16 | 100 | 91 | 78 | 70 | 102 | 90 | 77 | 71 |
25 | 132 | 118 | 102 | 91 | 130 | 117 | 104 | 91 |
35 | 164 | 150 | 127 | 114 | 169 | 143 | 117 | 113 |
50 | 196 | 182 | 152 | 146 | 187 | 169 | 139 | 134 |
70 | 251 | 228 | 195 | 178 | 226 | 208 | 174 | 165 |
95 | 305 | 273 | 236 | 214 | 269 | 247 | 208 | 195 |
120 | 351 | 314 | 272 | 246 | 300 | 282 | 239 | 221 |
150 | 401 | 360 | 311 | 278 | 339 | 321 | 269 | 247 |
185 | 461 | 410 | 359 | 319 | 382 | 356 | 300 | 278 |
240 | 546 | 483 | 424 | 378 | 435 | 408 | 348 | 321 |
300 | 611 | 552 | 474 | 419 | 495 | 469 | 391 | 365 |
400 | 716 | / | 546 | / | 574 | / | 456 | / |
