19 AWG/Kcmil OD 3/0 mm -none- Duplex URD Cable for Secondary Underground Distribution

ItemTechnical and Specification Sheet - Physical and Electrical Properties Table
Code Word-none-
Phase Conductor Size - AWG / Kcmil3/0
Phase Conductor Number of Wires19
Phase Conductor Number of Wires0.08 inch or 2.032 mm
Approx Cable Overall Diameter1.21 inch or 30.734 mm
Neutral Conductor Size - AWG / Kcmil3/0
Neutral Conductor Number of Wires19
Phase Conductor Number of Wires0.08 inch or 2.032 mm
Conductor Weight315 lbs/1000ft or 468.75 kg/km
Total Weight (XLPE Covered)430 lbs/1000ft or 639.88 kg/km
Ampacity (Direct Buried)305 amps
Ampacity (In Duct)210 amps


Note:


  • Conductor options are all aluminum conductor, aluminum alloy conductor, bare copper strands or as per your requirements.
  • Insulations can be Polyethylene (PE) or XLPE.
  • Custom specifications like conductor size, insulation materials and phase identification methods can be fulfilled.
  • Dimensions and weights not designated minimum or maximum are nominal values and subject to manufacturing tolerances.
  • Electricity Properties are based on theory calculation, values are subject to final production test results.
  • Normal length and shipping tolerances apply.
  • Reel sizes may vary.



Manufacturing Processes

19 AWG/kcmil -none- Duplex URD Cable factory overview

Products Package

19 AWG/kcmil -none- Duplex URD Cable commercial packed

Customer Visiting Showcase

19 AWG/kcmil -none- Duplex URD Cable customer factory tour