Eskimo 4 AWG AAC Phase + ACSR Bare Neutral - Duplex Service Drop - PE/XLPE Insulation - Volts 0.6/1kV

ItemTechnical and Specification Sheet - Physical and Electrical Properties Table
Code WordEskimo
Phase Conductor typeAAC
Phase Conductor size - AWG / kcmil4
Phase Conductor Number of Wires1
Phase Insulation Thickness0.045 inch or 1.143 mm
Approx Cable Overall Diameter0.54 inch or 13.716 mm
Neutral Conductor typeACSR
Neutral Conductor size - AWG / kcmil4
Neutral Conductor Number of Wires6/1
Bare Neutral Rated Strength1860 lbs or 0.83 kN
Conductor Weight (Phase+Neutral)78 lbs/1000ft or 116.07 kg/km
Total Weight110 lbs/1000ft or 163.69 kg/km
Ampacity (PE Covered)115
Ampacity (XLPE Covered)145


Dimensions and weights not designated minimum or maximum are nominal values and subject to manufacturing tolerances.

Electricity Properties are based on theory calculation, values are subject to final production test results.

Normal length and shipping tolerances apply.

Reel sizes may vary.

Manufacturing Processes

Eskimo 4 AWG AAC+ACSR Duplex Service Drop production line

Products Package

Eskimo 4 AWG AAC+ACSR Duplex Service Drop commercial packed

Customer Visiting Showcase

Eskimo 4 AWG AAC+ACSR Duplex Service Drop customer factory tour